Mac Forum / General / General / August 2006

The print dialogue in Classic allows the printer to be selected from a
drop down list. Where is that list stored? I want to delete printers
from the list that are no longer valid.

Printer Driver needed for Konica Minolta 1350W Page Pro.   I'm told
such a thing exists, but am unable to locate such.   Anyone??
* posted via http://www.mymac.ws
* please report abuse to http://xinbox.com/mymac

Does Tiger have built-in drivers for the Canon Pixma iP90, or is it
necessary to install the drivers that are included with the printer?
I'm not concerned with Canon's "Easy-PhotoPrint" or other non-essential
software.

I installed the core duo temperature guage today. Got 18 C and 3.4%
or so (that flucuated).  So, is this good bad or indifferent?

I find it puzzling that frequently in these forums a "how do i" question is
asked and even when there is a straightforward and simple method available
via the OS X interface there is a "go to the terminal and...." suggestion.
Some instances......

Hi gang,
I'm a Solaris geek by day and my coworkers convinced me to get a mac
since they all use them and love them.  So I got a used ibook from a
guy but failed to get the core login users password even though I'm

I've recently had to use Garageband as a make-shift DAW while my
hardware multitrack is out of commission.
Its been quite pleasurable, but I have an issue with latency.
There is no ability to set the buffer size and with either the internal

Can anyone recommend an inexpensive inkjet color printer that would
work well with a 450MHz Blue&White G3?  It needs to work well (not
sluggishly) with the B&W which uses USB 1.1 and is normally booted in
OS 9.2.2, not OS X.

I have an old AGP 400Mhz G4 and would like to use a wirless conntection
to connect to the net.
I have a linksys broadband router for the modem end but have a few
questions on the G4 (receive)  end. First off doesnt this model G4

This is really hard to explain....
I've got a Mac G3 with several hard drives.
Some of them are running OS 8.6 and some are running OS 9.2
I'd like to keep those drives as-is because I have software that

Okay, ladies and gentlemen, I got the core duo temp gauge and it is
currently at 19 C and bouncing around in the 10% area. Is this a good
thing or a bad thing? When (if) should I start to get concerned?

I often connect to a unix host using aterm (better than xterm) from my
10.4.7 intel-duo-mini with the -X parameter. Everything works well until
I try to run an X-11 command (like xeyes or xclock) on the remote box.
When I try this it times out waiting for the display to become ...

I have a G5 desktop with some PCI Express slots and I was wondering
what people did with these. From what I can tell, there are graphics
boards, boards for adding firewire ports etc. but I was wondering if
there are any other kinds of specialized boards that you use that might

Does anyone here have any first-hand experience with an Xserve cluster?
Is it really as wonderful and easy-to-use as Apple makes out?
Our group wants to invest in a cluster, to use for serious
number-crunching (simulations and data-analysis, not as a web/email

I've been noticing that my gen 1 dual 2.0 G5, 10.4.7 intermittently
freezes (usually after it has been idle for a while).
I've been running Spin Control (part of CHUD tools), and when it
freezes, spin control reports that every open application has become