 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
Mac Forum / Applications / Virtual PC / April 2007Activesync 4.1 won't work
I have osx 10.4.3 installed on a Powerbook G4 1GHz. Also installed is VPC 7.0.2 with WinXP Pro. I can not Get Activesync to reconize my Dell Axim 51v with WM5. The Axim can only have WM5 installed so rolling back to Activesync 3.8 is not an option. I did have an older Ipaq that would work fine with 3.8. Firewall is turn off on both Tiger and Windows XP Pro. In the device manager, under the network adapters, the Windows Mobile-based Device does show with an ! but it has a Code 10, this device cannot start. At the top of the screen it does have Location 0 (Dell Axim X51v). When plugging in the Axim it shows connecting on its Activesync screen but nothing happens. The unit does sync to another PC that is running WinXP pro at work. Any ides? i have exactly the same problem here. code 10 with a "!". i'm using VPC 7.0.2 + win xp pro + actuvesync. Pocket pc is O2 atom running WM5. anyone can help out? Yup, same for me with T-mob MDA. The phone tries to fake being a network device and then cannot start up. An old MADII syncs fine with same install of AS 4.1, but it does not pretend to be a network (NDIS) device, it actually shows up as a USB device. MS buggered up AS worse than it was before, including no more Wifi sync support.... I am having the same or very similar problem! I have a new Dell Axim x51v and it will not sync up with either my Dell 5100 series computer or Sony Laptop with Activesync 4.1--I have an iPaq that works just fine. Have you found any solutions yet? Thanks. Brent > I have osx 10.4.3 installed on a Powerbook G4 1GHz. Also installed is > VPC 7.0.2 with WinXP Pro. I can not Get Activesync to reconize my Dell [quoted text clipped - 7 lines] > connecting on its Activesync screen but nothing happens. The unit does > sync to another PC that is running WinXP pro at work. Any ides? Hmmmm You cannot sync any WM5 device with VPC however if you are saying you cannot sync it with a real PC either then I may have the solution. Connect your WM5 device to your PC. Open Control Panel, networks. You should see a network connection that has a number at the end of it, random number don't worry about it. Get properties on this network. You will find that none of its properties are checked. Check them all. Save and close. Unhook your WM5 device. Connect it again and all should be fine. Note that if you connect to a different USB port you may need to go through this again. Cheers. Robin > I am having the same or very similar problem! I have a new Dell Axim x51v > and it will not sync up with either my Dell 5100 series computer or Sony [quoted text clipped - 12 lines] >> connecting on its Activesync screen but nothing happens. The unit does >> sync to another PC that is running WinXP pro at work. Any ides? >MS buggered up AS worse than it was before, including no more Wifi sync >support.... Maybe you wanna check yer facts here. ActiveSync is not the problem. It's WM5. WM5 does not work with VPC. I agree partially, since as stated above, an older Windows CE device works (as well as AS ever did, i.e. slow, lots of glitches etc) with ActiSyn 4.1 and VPC 7.0 (using USB). A lot of people are bummed now that WM5 devices (running Gates SW) don't sync with another Gates product (AS) running on VPC (now also a Gates product). See the Redmond hackers should have checked that one LONG ago. I am also bummed that even if WM5 talked to AS under VPC, they dropped the sync-via-WiFi and syn-via-BT support, supposedly because some big clients complained about security. > I am also bummed that even if WM5 talked to AS under VPC, they dropped > the sync-via-WiFi and syn-via-BT support, supposedly because some big > clients complained about security. Agreed AND they also pulled the ability to sync 'when YOU want too'. I.e. AS now syncs all the time. I much preferred to do manual syncs when I wanted to do them. This feature has also been removed. Robin Thanks, however, I don't have a PC (anymore). > I have osx 10.4.3 installed on a Powerbook G4 1GHz. Also installed is > VPC 7.0.2 with WinXP Pro. I can not Get Activesync to reconize my Dell [quoted text clipped - 7 lines] > connecting on its Activesync screen but nothing happens. The unit does > sync to another PC that is running WinXP pro at work. Any ides? I resolved this same problem by uninstalling and reinstalling the sync manager on my pc (ActiveSync4.5). I also installed the sync manager while the smart phone was connected via usb (MS recommended). |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.