> I have my Mac and a PC at home and would like to run the PC from my Mac
> but can't seem to get RDC to work. Are there any good instructions? I
> have done what the MS site says to do to get the PC set up and I have
> tried to set up the router correctly and it seems to be ok. I am not
> sure what I am doing incorrectly.
When you have a home situation, very little needs to be done to make
this work. You shouldn't have to configure anything with your router. I
suggest you see if you can undo what you've done there just make sure
nothing interferes.
First, you must be running Windows XP Professional. XP Home does not
have this feature.
In Windows XP, right-click your "My Computer" icon on the Desktop and
select Properties. Under the "Remote" tab, select the second checkbox to
allow remote connections. If your Windows system has its firewall
activated, you'll need to ensure that RDC connections are allowed
through the firewall. Finally, note your Windows system's IP address.
(From a home Mac, you can't connect via name without much additional
setup.) Go to Start --> Run --> "cmd" --> OK and type "ipconfig".
On your Mac, launch RDC and enter the Windows system's IP address. You
should be able to connect.
For additional information, have a look at this page
<http://www.microsoft.com/windowsxp/using/mobility/getstarted/remoteintro
.mspx> on Microsoft's website.
Hope this helps! bill

Signature
William M. Smith
(Microsoft Interop MVP - Mac/Windows)
hughw36 - 16 Jul 2006 21:39 GMT
is it possible to ping the network from the Mac and get active
addresses returned?
Hugh W
> > I have my Mac and a PC at home and would like to run the PC from my Mac
> > but can't seem to get RDC to work. Are there any good instructions? I
[quoted text clipped - 26 lines]
>
> Hope this helps! bill
William Smith - 18 Jul 2006 02:39 GMT
> is it possible to ping the network from the Mac and get active
> addresses returned?
Yes, so long as you don't have anything like firewalls preventing ICMP
replies. If your network is something like 192.168.1.xxx, replace the
"xxx" with 255.
Pinging xxx.xxx.xxx.255 broadcasts to all computers on the network.
Hope this helps! bill

Signature
William M. Smith
(Microsoft Interop MVP - Mac/Windows)
Hugh Watkins - 21 Jul 2006 00:09 GMT
>>is it possible to ping the network from the Mac and get active
>>addresses returned?
[quoted text clipped - 6 lines]
>
> Hope this helps! bill
thanks
i will try it when I get home in a couple of months

Signature
new computer = new blog
http://mac-on-intel.blogspot.com/
daily blogs with new photos
http://snaps2006.blogspot.com/
http://slim2005.blogspot.com/
family history
http://hughw36.blogspot.com
Bill Sanderson - 25 Jul 2006 16:27 GMT
> Pinging xxx.xxx.xxx.255 broadcasts to all computers on the network.
This might be useful, if correct. I tested pinging from a Windows 2000
server, and received no ping responses. I know for sure that some devices
in that subnet respond to pings.
Ditto my home network, consisting of XP machines and a router.
William Smith - 26 Jul 2006 01:58 GMT
> > Pinging xxx.xxx.xxx.255 broadcasts to all computers on the network.
>
[quoted text clipped - 3 lines]
>
> Ditto my home network, consisting of XP machines and a router.
I'm sure various things could be happening with your networks that keep
this from working, however, I can attest that it does work for me. I do
get responses from several devices on my home network. Keep in mind it
probably only works so long as all devices are together on the same
subnet. I'm not sure if it's possible to ping devices using this method
on a different network.
bill

Signature
William M. Smith
(Microsoft Interop MVP - Mac/Windows)
Bill Sanderson - 26 Jul 2006 03:20 GMT
Thanks - I'll keep trying.

Signature
>> > Pinging xxx.xxx.xxx.255 broadcasts to all computers on the network.
>>
[quoted text clipped - 13 lines]
>
> bill